jaydeeptubes.com

Eddy Current Testing vs Hydrostatic Testing: How Copper Alloy Tubes Are Quality-Checked Before Shipment

An overview of eddy current and hydrostatic testing for copper and copper alloy tubes, and when buyers should specify each one.

Two tests dominate quality control for copper and copper alloy tubes before they leave the mill: eddy current testing and hydrostatic (or pneumatic) pressure testing. They check different things, and most specifications call for both — understanding what each one actually catches helps buyers write a clearer purchase order and read a test report with more confidence.

What Eddy Current Testing Checks

Eddy current testing passes the tube through an electromagnetic coil that is sensitive to discontinuities such as pits, cracks, inclusions or wall-thickness variation along the full length of the tube. It is a non-destructive, 100%-of-length test, which is why most project specifications and ASTM standards, including ASTM B111, call for it as a standard production check rather than a sample test.

What Hydrostatic (or Pneumatic) Testing Checks

Hydrostatic testing pressurises each tube with water to a specified test pressure and holds it to confirm there is no leak, bulge or failure. Pneumatic testing does the same with air or inert gas under appropriate safety controls. Both are proof tests of structural integrity under pressure, rather than a defect-location test the way eddy current testing is.

Why Buyers Usually Specify Both

  • Eddy current testing finds localised flaws that a pressure test at normal test pressure might not open up.
  • Hydrostatic or pneumatic testing confirms the tube actually holds the pressure the service will apply.
  • Together they give a documented, traceable quality record for the mill test certificate, which matters for regulated industries such as power generation, marine and medical gas pipeline work.

What to Ask Your Supplier

Confirm which tests are run as standard versus which require a special request, what test pressure is used, and whether results are recorded per heat number or per individual tube. At Jaydeep Tubes, production testing sits inside an ISO 9001:2015 quality management system, and tube is manufactured to meet ASTM B111 and equivalent standards, with results carried through to the mill test certificate issued with every order.

Frequently Asked Questions

Is eddy current testing a substitute for hydrostatic testing?

No. They check different failure modes — eddy current testing locates discrete flaws, while hydrostatic testing confirms the tube holds pressure. Most specifications require both.

Will I receive test results with every shipment?

Yes, every order is accompanied by a mill test certificate documenting the applicable testing carried out against the specified standard.

Request a Quotation

Send us your specification, quantity and destination port and our team will respond with pricing, a production schedule and the documents we will supply. Contact Jaydeep Tubes or browse our product range.

Leave a Reply

Your email address will not be published. Required fields are marked *